Call us on 01924 364794  |  |

Neutras-2 low thermal conductivity wall ties

NEUTRAS-2 general purpose wall ties have both low thermal conductivity and high structural performance levels. This means they can be excluded from the current U value calculations in EN ISO 6946 and provide a credible solution to new legislation requirements.  Suitable for small commercial buildings and domestic dwellings with a maximum height of 15m and cavity widths up to 300mm.  (Type 2 Wall Tie)

Code Cavity Units
Neutras-2-200 75mm 250 pack
Neutras-2-225 100mm 250 pack
Neutras-2-250 125mm 250 pack
Neutras-2-275 150mm 250 pack
Neutras-2-300 175mm 250 pack
Neutras-2-325 200mm 100 pack
Neutras-2-350 225mm 100 pack
Neutras-2-375 250mm 100 pack
Neutras-2-400 275mm 100 pack
Neutras-2-425 300mm 100 pack

  • BBA Approved cavity wall ties (Agrément Certificate: 17/5462).
  • Application – A low thermal conductivity, general-purpose wall tie for applications such as small commercial buildings and domestic dwellings. They are suitable for buildings with a maximum height if 15m and for flat sites where the basic wind speed is up to 31m/s and altitude is not greater than 150m above sea level.
  • Design – Constant drip spiral feature to prevent moisture travelling across the cavity, it can be installed either way up.
  • Material – Manufactured from continuous basalt fibre and vinyl ester resin composite.
  • Behaviour in relation to fire – Suitable for buildings requiring 60 minute fire resistance.
  • Durability – Service life of not less than 60 years.
  • Thermal performance – In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity.
  • Compliance – Tested as Type B (sound) and as Type 2 (strength) to BS EN 845-1.