The straddle type joist hanger is used when timber joist positions are directly opposite each other on either side of a wall or beam. As standard the straddle hanger is manufactured to suit 100mm blockwork, however any width is available to order.
| Size Table | ||||||
|---|---|---|---|---|---|---|
| Depth (Actual) mm | Width of Hanger (mm) | |||||
| 38 | 44 | 47 | 50 | 63 | 75 | |
| 100 | 38X100 | 44X100 | 47X100 | 50X100 | 63X100 | 75X100 |
| 125 | 38X125 | 44X125 | 47X125 | 50X125 | 63X125 | 75X125 |
| 150 (140) | 38X150 | 44X150 | 47X150 | 50X150 | 63X150 | 75X150 |
| 175 (165) | 38X175 | 44X175 | 47X175 | 50X175 | 63X175 | 75X175 |
| 200 (190) | 38X200 | 44X200 | 47X200 | 50X200 | 63X200 | 75X200 |
| 225 (215) | 38X225 | 44X225 | 47X225 | 50X225 | 63X225 | 75X225 |
| 250 (240) | 38X250 | 44X250 | 47X250 | 50X250 | 63X250 | 75X250 |
| Size Table | |||||
|---|---|---|---|---|---|
| Depth (Actual) mm | Width of Hanger (mm) | ||||
| 88 | 91 | 100 | 125 | 150 | |
| 100 | 88X100 | 91X100 | 100X100 | – | – |
| 125 | 88X125 | 91X125 | 100X125 | 125X125 | – |
| 150 (140) | 88X150 | 91X150 | 100X150 | 125X150 | 150X150 |
| 175 (165) | 88X175 | 91X175 | 100X175 | 125X175 | 150X175 |
| 200 (190) | 88X200 | 91X200 | 100X200 | 125X200 | 150X200 |
| 225 (215) | 88X225 | 91X225 | 100X225 | 125X225 | 150X225 |
| 250 (240) | 88X250 | 91X250 | 100X250 | 125X250 | 150X250 |
| Order Code = SMH / D / width x depth i.e. SMH /D / 50×200 (100 straddle) | |
| Width (W) | 38, 44, 47, 50, 63, 75, 88, 91, 100, 125 & 150mm |
| Depth (D) | 100, 125, 150*, 175*, 200*, 225* & 250mm* |
| Bearing Surface (B) | 75mm |
*Please note: As standard all hangers 150mm deep and above are manufactured 10mm less to allow for regularised timber and to ensure that joist levels are maintained.
When ordering, specify hanger as SMH/D/(size from table) e.g. SMH/D/50X225/100 for a 50mm wide hanger with a depth of 225mm and a 100mm straddle.
*Please note: As standard all hangers 150mm deep and above are manufactured 10mm less to allow for regularised timber and to ensure that joist levels are maintained.
A range of Heavy Duty Joist Hangers designed for building into brickwork or blockwork. As standard all hangers are manufactured from 2.0mm thick pregalvanised steel to BS EN 10346. Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 3.5N/mm² and above. All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm Sheradised square twist nails.
| Hangers per Box | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Timber Depth | Timber Width (mm) | ||||||||||
| 38 | 44 | 47 | 50 | 63 | 75 | 88 | 91 | 100 | 125 | 150 | |
| 100mm | 50 | 40 | 40 | 40 | 40 | 40 | 30 | 30 | 30 | – | – |
| 125mm | 45 | 40 | 40 | 40 | 40 | 30 | 30 | 30 | 20 | 15 | – |
| 150mm | 40 | 40 | 40 | 40 | 40 | 25 | 25 | 25 | 20 | 15 | 15 |
| 175mm | 30 | 30 | 30 | 30 | 30 | 20 | 20 | 20 | 20 | 15 | 10 |
| 200mm | 25 | 25 | 25 | 25 | 25 | 20 | 20 | 20 | 15 | 10 | 10 |
| 225mm | 25 | 25 | 25 | 25 | 25 | 20 | 20 | 20 | 15 | 10 | 10 |
| 250mm | 25 | 25 | 25 | 25 | 20 | 15 | 15 | 15 | 15 | 10 | 10 |
BPC Building Products Ltd.
Flanshaw Way
Wakefield
WF2 9LP
© BPC – 2023
Part of the Vista Group
